AP pure sine wave inverter is the latest model presented by Yiyuan Electric Co.,Ltd.. Developed on the base of our previous PSW7 series, the AP charger has achieved significant improvements on battery charging, AC transfer, etc. By adopting DIP (dual in-line package) switch, the AP pure sine wave inverter provides more smart options for users to customize the performance of the device.
Features of AP Pure Sine Wave Inverter, Charger
1. High overload ability of our AP charger is up to 300% rated power(20 sec.).
2. APC pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle) *. It can extract max. power from various batteries with different protections, and low voltage trip can be selected (9.5V/10V or 10V/10.5V).
3. Uses PFC(power factor correction) for charger, which has less power consumption than conventional units.
4. It has 15s delay before transfer when AC resumes, and overload protection when our APC pure sine wave inverter equips with generator.
5. 10ms typical transfer time between battery and AC, which guarantees power continuity of APC charger. Uses selectable input AC voltage (140-270V or 154-253V) for different kinds of loads.
6. Our APC charger allows start up and through power with depleted batteries. Its powerful charge rate up to 90Amp**.
7. It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries.
8. LCD status display, battery/AC priority switch, USB communication port are available for our APC pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too. Note:*For 1KW one. **For some models.
AP Series Inverter &Charger
| Electrical Specifications | ||||||||
| Model | AP 1000W | AP 1500W | AP 2000W | AP 3000W | AP 4000W | AP 5000W | AP 6000W | |
| Inverter Output | Continuous Output Power | 1000W | 1500W | 2000W | 3000W | 4000W | 5000W | 6000W |
| Surge Rating(20s) | 3000W | 4500W | 6000W | 9000W | 12000W | 15000W | 18000W | |
| Capable of Starting Electric Motor | 1HP | 1.5HP | 2HP | 3HP | 4HP | 5HP | 6HP | |
| Output Waveform | Pure Sine wave/Same as input(Bypass mode) | |||||||
| Nominal Efficiency | >88%(Peak) | |||||||
| Line Mode Efficiency | >95% | |||||||
| Power Factor | 0.9-1.0 | |||||||
| Nominal Output Voltage rms | 100-110-120Vac / 220-230-240Vac | |||||||
| Output Voltage Regulation | ±10% RMS | |||||||
| Output Frequency | 50/60Hz ± 0.3Hz | |||||||
| Short Circuit Protection | Yes, Current Limit Function (Fault after 1sec) | |||||||
| Typical transfer Time | 10ms(Max) | |||||||
| THD | < 10% | |||||||
| DC Input | Nominal Input Voltage | 12.0Vdc | ||||||
| ( *2 for 24Vdc, *4 for 48Vdc) | ||||||||
| Minimum Start Voltage | 10.0Vdc | |||||||
| Low Battery Alarm | 10.5Vdc / 11.0Vdc | |||||||
| Low Battery Trip | 10.0Vdc / 10.5Vdc | |||||||
| High Voltage Alarm & Fault | 16.0Vdc | |||||||
| High DC Input Recovery | 15.5Vdc | |||||||
| Low Battery voltage recover | 13.0Vdc | |||||||
| Idle Consumption-Search Mode | < 25 W when Power Saver On | |||||||
| Charge | Input Voltage Range | Wide: 90~135VAC / 164~243VAC;Narraw: 100~135VAC / 194~243VAC; | ||||||
| Output Voltage | Depends on battery type | |||||||
| Charger Breaker Rating | 10A | 10A | 10A | 20A | 20A | 30A | 30A | |
| Max Charge Rate | 35A / 70-90A Max (Charger Current Control) | |||||||
| Over Charge Protection Shutdown | 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc) | |||||||
| Charger curve(4 stage constant current)4 step digital controlled progressive charge | Battery types ( *2 for 24Vdc, *4 for 48Vdc) | |||||||
| Battery type | Fast Vdc | Float Vdc | ||||||
| Gel U.S.A | 14.0 | 13.7 | ||||||
| A.G.M 1 | 14.1 | 13.4 | ||||||
| A.G.M 2 | 14.6 | 13.7 | ||||||
| Sealed Lead Acid | 14.4 | 13.6 | ||||||
| Gel Euro | 14.4 | 13.8 | ||||||
| Open Lead Acid | 14.8 | 13.3 | ||||||
| Calcium | 15.1 | 13.6 | ||||||
| De-sulphation | 15.5 for 4hrs | |||||||
| Remote Control | Yes. Optional | |||||||
| Bypass & Protection | Input Voltage Waveform | Sine wave (Grid or Generator) | ||||||
| Nominal Voltage | 120Vac | 230Vac | ||||||
| Low Voltage Trip | 80V/90V±4% | 184V/154V±4% | ||||||
| Low Voltage re engage | 90V/100V±4% | 194V/164V±4% | ||||||
| High Voltage Trip | 140V±4% | 253V±4% | ||||||
| High Voltage re engage | 135V±4% | 243V±4% | ||||||
| Max Input AC Voltage | 150VAC | 270VAC | ||||||
| Nominal Input Frequency | 50Hz or 60Hz (Auto detect) | |||||||
| Low Freq Trip | 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz | |||||||
| Low Freq re engage | 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz | |||||||
| High Freq Trip | 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz | |||||||
| High Freq re engage | 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz | |||||||
| Output Short circuit protection | Circuit breaker | |||||||
| Bypass breaker rating | 10A | 15A | 20A | 30A | 30A | 40A | 40A | |
| Transfer switch rating | 30amp for UL & TUV | 40amp for UL | ||||||
| Max bypass current | 30amp | 40amp | ||||||
| Mechanical Specification | Mounting | Wall mount | ||||||
| Inverter Dimensions(L*W*H) | 382*218*179mm | 442*218*179mm | 598*218*179mm | |||||
| Inverter Weight | 16KG | 17KG | 20KG | 24KG | 35KG | 45KG | 45KG | |
| Shipping Dimensions(L*W*H) | 520*315*300mm | 580*315*300mm | 740*315*300mm | |||||
| Shipping Weight | 18KG | 19KG | 22KG | 26KG | 37KG | 47KG | 47KG | |
| Display | Status LEDs / Status LEDs+LCD | |||||||
| Standard Warranty | 1 Year | |||||||
