1Adopts New Pure Sine-wave Inverter Technology2High power density with superior reliability and performance3Surge Rating: 2 * Prated4Input/output isolated design5Design for harsh environment and various equipments6“All master” dynamic mechanism eliminate single point failure to optimize reliability7Pure sine wave output (THD < 3%)8Output frequency: 50 / 60Hz switch selectable9Low power “Power Saving Mode” to conserve energy10Capable of driving highly reactive & capacitive loads at start moment.11LED indicators display12Advanced DSP Control13Protection: Input low voltage/Overload/Short circuit/Low battery alarm/Input over voltage/Over temperature/ High output voltage/Low output voltage/Unit internal failure/Unit parallel failure14N+X redundancy function (optional)15Adopting DIP (Dual ln-line Package) switch
Specification | Model No. | |||||||||||||||||
Item | OPS0612 | OPS1012 | OPS2012 | OPS0612E | OPS1012E | OPS2012E | OPS3012E | |||||||||||
Input | ||||||||||||||||||
Nominal voltage | 12Vdc(*2 for 24Vdc) | |||||||||||||||||
Operating range | 10Vdc ~ 15Vdc | |||||||||||||||||
Startup voltage | 11.75Vdc~14.7Vdc | |||||||||||||||||
Load level | 0~29% | 30~69% | 70~100% | |||||||||||||||
Battery alarmlevel | battery-low level | 11.3Vdc | 11.2Vdc | 11.0Vdc | ||||||||||||||
battery-high level | 14.0Vdc | 13.9Vdc | 13.7Vdc | |||||||||||||||
Battery shut-down level | battery-under level | 10.3Vdc | 10.2Vdc | 10.0Vdc | ||||||||||||||
battery-over level | 15.0Vdc | 14.9Vdc | 14.7Vdc | |||||||||||||||
Battery recovery level | battery-under recovery | 12.5Vdc | ||||||||||||||||
battery-over recovery | 14.0Vdc | |||||||||||||||||
Output | ||||||||||||||||||
Output Waveform | Pure sine wave | |||||||||||||||||
Output Power | 600W | 1000W | 2000W | 600W | 1000W | 2000W | 3000W | |||||||||||
Surge Rating | 2 * Prated | |||||||||||||||||
Nominal Output Voltage | 110 / 115 / 120Vac | 220 / 230 / 240Vac | ||||||||||||||||
Output Voltage Regulation | ± 5%……when input voltage higher than battery-low level | |||||||||||||||||
Output Frequency | 50/60Hz ± 0.1% | |||||||||||||||||
Output Current @ 220/230/240 | — | 2.73A / 2.61A / 2.50A | 4.55A / 4.35A / 4.17A | 9.10A / 8.70A / 8.34A | 13.65A / 13.05A / 12.51A | |||||||||||||
Output Current @ 110/115/120 | 5.45A / 5.22A / 5A | 9.09A / 8.70A / 8.33A | 18.18A / 17.39A / 16.67A | — | ||||||||||||||
Crest factor | 03:01 | |||||||||||||||||
THD | <3%, linear load; <5%, non-linear load….at nominal input voltage | |||||||||||||||||
<15%………………………………………………….at minimum cut-off (10Vdc) level | ||||||||||||||||||
Note: non-linear load condition: P.F.>0.7 | ||||||||||||||||||
Peak Output Current @ 220/230/240 | — | 5.46A / 5.22A / 5.00A | 9.10A /8.70A / 8.34A | 18.20A / 17.40A / 16.68A | 27.3A / 26.1A / 25.02A | |||||||||||||
Peak Output Current @ 110/115/120 | 10.92A / 10.44A / 10A | 18.2A / 17.4A / 16.68A | 27.3A / 26.1A / 25A | 36.4A / 34.8A / 33.36A | — | |||||||||||||
Efficiency | >88% (typical), 90% (peak) | >90% (typical), 92% (peak) | ||||||||||||||||
No load Current Draw | <12W | <20W | <12W | <20W | ||||||||||||||
Stand-by Current Draw | <6W | <10W | <6W | <10W | ||||||||||||||
Over load protection | Refer to Sec.3.9 and Sec.3.10 | |||||||||||||||||
Environmental | ||||||||||||||||||
Noise | <50 dB | |||||||||||||||||
Operating temperature | Operation temperature: –20 to +70°C | |||||||||||||||||
–5 to +40 °C with full performance. | ||||||||||||||||||
Storage temperature | -30 ~ 70°C | |||||||||||||||||
Operating humidity | 90% RH (no condense) | |||||||||||||||||
Operating Attitude | 1500m | |||||||||||||||||
Safety | EN60950, UL-458, CE | |||||||||||||||||
EMC | FCC Part 15 class B, EN55022 Class B, e-mark | |||||||||||||||||
Mechanical | ||||||||||||||||||
Dimension L x W x H (mm) | 270*160*70 | 355*180*82 | 412*285*121 | 270*160*70 | 355*180*82 | 412*285*121 | 412*285*121 | |||||||||||
Weight (Kg) | 2.5 | 4.0 | 8.0 | 1.5 | 4.0 | 8.0 | 10.0 | |||||||||||
Force cooling | Load and Temperature Controlled Cooling Fan | |||||||||||||||||
Control | ||||||||||||||||||
Protection | Overload, Short circuits, Reverse polarity, Over / under input voltage, Over temperature, High output voltage, Low output voltage, Unit internal failure, Unit in-parallel failure | |||||||||||||||||
Startup time | < 5 Seconds | |||||||||||||||||
Power Saving Recovery Time | 5 Seconds | |||||||||||||||||
Human Interface | ||||||||||||||||||
LED Indicator | 3-LED installed | |||||||||||||||||
Audible Alarm | Buzzer | |||||||||||||||||
Communication Interface | RS232 |